Video Data Transmitter with Hybrid Network Support for Drone/UAV Systems
The HCL620 video data transmitter utilizes MIMO dual transmission and reception technology to overcome signal blockage during aircraft maneuvers while delivering throughput up to 100Mbps. This makes it ideal for high-speed video data transmission in demanding unmanned system applications.
Advanced Mesh Networking Capabilities
In a MESH network configuration, each HCL620 MANET radio operates in peer-to-peer mode, creating a true mobile network. The system easily integrates with various unmanned platforms and connects directly to monitors, input devices, and sensors through multi-functional I/O ports, forming a complete Ground Control Station (GCS) or field data processing unit.
- Supports point-to-point, point-to-multipoint, chain relay, mesh networking and hybrid network topologies
- Self-forming and self-healing network capabilities
- Ultra-reliable connectivity for unmanned systems
Technical Specifications
| Model Number |
HCL620 |
| Product Name |
Video Data Transmitter Support Hybrid Network For Drone/UAVs Unmanned Systems |
| Modulation |
TDD OFDM |
| Frequency |
1420~1530MHz, other frequencies can be customized |
| FHSS |
Support |
| Bandwidths |
3MHz, 5MHz, 10MHz, 20MHz, 40MHz |
| Throughput |
Maximum 100Mbps throughput |
| RF Transmission Power |
10W |
| Constellation |
QPSK, 16QAM, 64QAM self adaption |
| Sensitivity |
-102dBm(1Mbps@20MHz) |
| Ethernet Ports |
2 * Ethernet ports for IP data transmission |
| Serial Ports |
2 channel TTL for serial data transmission (TTL 3.3V uart as default, RS232 optional) |
| Transmission Range |
2~10km(ground-to-ground), 20~150km(UAV-to-ground, optional range level) |
| Control By |
Web UI and Control Uart |
| Encryption |
AES128 |
| Networking Mode |
Point to Point, Point to Multipoint, Relay |
| Movement Speed |
Support no less than 240km/h |
| Power Input |
24~32V |
| Power Consumption |
<1.86A@28V(access node) and <0.75A@28V(central node) |
| Dimensions |
131*93.7*24.8mm |
| Weight |
277g |
I/O Ports Configuration
| Ethernet*2 |
2 channel 4Pin GH1.25mm lockable connector, bridged inside with same IP address |
| Uart1 |
TTL3.3V data UART, 3Pin GH1.25mm lockable connector, can be changed to RS232 as requirement |
| Uart2 |
TTL3.3V data UART, 3Pin GH1.25mm lockable connector, can be changed to RS232 as requirement. It can be set as control uart via web UI |
| Sbus |
3Pin GH1.25mm lockable connector. Sbus-in and Sbus-out |
| Power in |
XT30PW-M connector |
| ANT1 |
Tx/Rx Antenna port, SMA female |
| ANT2 |
Tx/Rx Antenna port, SMA female |
MESH Network Nodes and Throughput
The HCL620 MANET network radio operates in either access node mode or central node mode, managed through the network user interface. It supports up to 64 access nodes connecting to a central node within the same wireless local area network, sharing the full transmission bandwidth (up to 100Mbps throughput). Data transmission is categorized as downlink (central to access node) and uplink (access to central node), with the ratio controllable via web UI. In point-to-point configurations, both uplink and downlink data streams share the complete transmission bandwidth.
Frequently Asked Questions
Q1. Can I get a sample order for this MANET network radio?
A1: Sure, welcome sample order for testing.
Q2. Does this Mesh networking radio support any other cameras except IP camera?
A2: IP camera video can be connected directly via Ethernet port. HDMI/SDI/AHD/AV camera video requires encoding with our SE10/SE11 encoder before connecting to HCL620 via Ethernet.
